News

When on duty, it is easy for on-duty personnel to conflict with the masses. Afterwards, audio and video recordings are needed to provide evidence to determine whether the on-duty personnel violated the rules during their duty. When an emergency occurs, the competent authority needs to dispatch more personnel to the scene in a timely manner. The superior department needs to effectively supervise the operation of special vehicles and the work of staff. Therefore, it is imperative to accelerate the information management of special vehicles in order to better maintain the good image of the department among the masses and improve work efficiency. When an emergency occurs, it can be dispatched and remotely commanded in real time. Pain point analysis: Need for quick response and remote command Once an alarm sounds when a case occurs in a certain place, the command center needs to be able to quickly know the situation of the personnel around the scene of the incident, accurately dispatch the special vehicle closest to the scene of the incident to support, and improve the response speed. In addition, the command center needs to remotely understand the situation at the scene of the incident, and the on-site executive personnel can report to the command center at any time through two-way voice, which is convenient for the command center to efficiently command and dispatch personnel. Need to strengthen deterrence It is necessary to have a certain deterrent effect on possible criminals, to form huge psychological pressure on criminals with bad intentions, to reduce criminal intentions, and to serve as strong evidence and information for post-analysis, thereby increasing the safety factor. Protect rights and interests, and make work transparent Disclosure in accordance with regulations is to maximize the transparency of duty, improve the credibility of work, and truly be close to the people, benefit the people, and love the people, to ensure that power is operated in the sun to the maximum extent. The audio and video recordings of the duty scene can be used as a basis for evaluating whether the personnel are fair and civilized on duty. It can not only monitor the civilized, fair and just behavior of the duty personnel in real time, but also protect the rights and interests of the staff. In the past, when handling the scene, the parties left while the staff were not paying attention, or the parties went back on their words. When the duty personnel negotiated with the public, the system became an unbiased witness. Improve driving safety It is necessary to prevent special vehicles from having traffic accidents and causing unnecessary adverse social impacts. It is necessary to effectively regulate the drivers of the vehicles, urge them to drive in a standardized manner, and give timely warnings. Reduce illegal use of vehicles and non-professional use of vehicles In response to complaints from the public that staff members use privileged vehicles to arbitrarily violate traffic rules, use public vehicles for personal purposes, and other illegal use of vehicles, it damages the overall image of government departments and causes adverse social impacts. Real-time intelligent technical supervision means are needed to effectively reduce the illegal use of special vehicles by on-duty personnel and non-professional use of vehicles. Post-event video recording can also be used as a basis for analyzing whether on-duty personnel use vehicles reasonably. Solution: By installing a 4G wireless video intelligent vehicle terminal kit on special vehicles, on-duty personnel are equipped with on-duty recorders. For temporary sites, intelligent 4G control balls can be used to achieve temporary control. The entire system uses high-power long-distance camera monitoring, high-definition voice intercom command and dispatch, and integrates the back-end data cloud platform to achieve remote command and dispatch management of the patrol duty system. System functions: Full-time monitoring: Real-time audio and video monitoring of vehicles, remote viewing of various on-site conditions and historical data, real-time understanding of the location and current status of each vehicle through GPS high-precision positioning, and the historical trajectory of vehicle driving can be retrieved at any time. The system can make law enforcement officers more accountable and reduce the situation of random complaints from the public; Safe driving assistance system: The built-in safety module of the vehicle terminal can realize the driver's driving status monitoring DSM system, such as yawning, closing eyes, smoking, making phone calls, drinking water, looking around; at the same time, the vehicle's forward-looking auxiliary driving ADAS system, such as front vehicle collision warning FCW, vehicle distance warning HMW, lane departure warning LDW, greatly improves the driving safety active prevention ability; Large-magnification long-distance monitoring: A high-definition camera with high magnification is installed on the top of special vehicles, which can monitor the scene from a distance to meet various patrol duty scene needs; Duty record: The portable patrol duty recorder realizes the on-site collection, transmission and recording of personnel law enforcement; Temporary control: For certain areas, high-definition control balls can be used to conveniently and timely enter the scene and report the on-site situation, and the supporting equipment does not affect the on-duty operations; the monitoring environment can be quickly set up and evacuated; the staff can record on-site; the person in charge can watch the front-end video and make decisions and commands through the mobile phone; Remote command and dispatch: The command center can check the relevant videos based on the fixed points and the location of the mobile personnel on the map, and command the nearest personnel to arrive at the scene; temporarily set up relevant teams to conduct audio and video dispatch and command; Data statistics: attendance report, operation report, alarm report; ptz camera systems for churches;ptz wireless camera;ptz camera dome;Mobile Electronic Sentry

Problems in the transportation of slag Illegal vehicles "black car transportation" "Spillage and dripping" during the transportation of slag "Random dumping" of illegal disposal of slag "Overloading and speeding" of slag vehicles     The above problems involve drivers, construction sites, transportation vehicles, and corporate organizations. Many construction sites leave the site without washing, and the large amount of mud brought by the wheels has caused considerable pollution to urban roads. Some slag trucks are seriously overloaded, and the carriages cannot be sealed. With the bumps along the way, the slag is scattered all over the ground. The construction party neglects supervision and lets it go. How to solve these management problems has become an urgent task for regulatory and law enforcement departments.   Intelligent slag truck solution The intelligent muck truck management system starts with solving the problems of spillage, dripping, and random dumping of muck trucks. By automatically judging the operating status of the muck truck, controlling its lifting switch, and limiting the speed, the following effects can be achieved: lifting is only possible at designated locations; the speed is automatically limited when arriving at designated areas; if the top cover is not closed or overloaded, the engine power is automatically reduced to correct it, and it will immediately return to normal after correction.   Hardware part     Vehicle positioning video monitoring Road transport vehicle management, vehicle Beidou positioning, track playback, electronic fence, car driving recorder function. Front, reverse, left and right side 4-way camera video monitoring, remote video viewing Vehicle cluster intercom, group by fleet and PTT intercom within the group, enterprises can dispatch vehicles in real time, the Urban Management Bureau can talk to vehicles point-to-point, and deal with illegal transportation in a timely manner   Active safety warning 1. ADAS advanced driver assistance system: forward collision warning, lane departure warning, pedestrian collision warning, etc. 2. DSM driver status detection, problems with the driver's status will directly lead to accidents, such as fatigue driving, making phone calls, and distracted driving. If the system detects that the driver has the state characteristics of fatigue driving or distracted driving, the system will automatically alarm and limit the speed. 3. BSD blind spot monitoring: millimeter wave radar detects the right blind spot. The system performs real-time detection of the 2m blind spot in front of the right side of the vehicle. If the pedestrian is in the dangerous range of the video surveillance, the system automatically alarms and links sound and light to remind the driver to pay attention to avoid obstacles.   Slag transportation management 1. Slag transportation certificate management: face recognition and vehicle certificate verification, display of electronic transportation certificate 2. Illegal transportation inspection: the platform issues inspection instructions, and the alarm is displayed on the LED screen 3. Cargo box status identification: empty, full, overload, canvas sealing, and compartment lifting identification 4. Transportation route management: transportation route planning, illegal dumping alarm 5. The on-board sensor integrates multiple functions such as load sensors, lifting sensors, tarpaulin covering sensors, speed sensors, etc., to realize empty and heavy vehicle identification, automatic forced sealing of the roof, heavy vehicle lifting, route planning, automatic zoning speed limit, prohibited areas, remote license processing and other control functions Software part        The smart slag management cloud platform combines advanced technologies such as mobile Internet, Internet of Things, cloud platform, big data, GIS, GPS, etc., and establishes an integrated smart slag management cloud platform through vehicle intelligent equipment, construction site monitoring probes, major intersection monitoring probes, and mobile supervision mobile phone apps.      The platform supports the smart slag comprehensive command center, registration and declaration management system, site supervision system, transportation supervision system, mobile supervision system, big data analysis system and basic information system, one center and six systems. At the same time, the smart slag management cloud platform can connect to smart systems such as smart sanitation and smart urban management to achieve seamless connection and full process coverage of urban management work.   1. Construction site management     The smart slag truck management system can set the construction site under construction in the current city and bind it to the slag truck, which can solve the problem of lifting at the specified location. 2. Disposal site management     The smart slag truck management system can set a designated disposal site. When the lifting is not within the scope of the disposal site and the construction site, it will be restricted, and the "random dumping" alarm will be reported to the management platform, which can solve the problem of random dumping. 3. Route management     The smart muck truck management system can easily create vehicle driving routes. After the created driving route is bound to the vehicle, an alarm will be generated once the muck truck deviates from the specified route; the vehicle that deviates from the route will also automatically limit its speed, and automatically recover after returning to the designated route. 4. Ring line management     When the muck truck enters the ring line area, the smart muck truck management system automatically limits the speed until it leaves the ring line area to return to normal. For example: when the vehicle arrives in the second ring area of a city, the vehicle will automatically limit its speed to the specified value 5. Industry comparative analysis     By statistically analyzing the bad data of all companies and organizations in the smart muck truck management system, comparative analysis of industry data can be achieved, and hierarchical expansion of data is supported, and event details can be viewed.   6. Company violation statistics The smart muck truck management system summarizes and displays the violations of vehicles and companies, and forms a company violation statistics report based on the company. 7. Single vehicle violation statistics The smart muck truck management system summarizes and displays the violations of vehicles and companies, and forms a single vehicle violation statistics report based on the vehicle

3G/4G wireless module related issues   Q: If you use the 3G wireless module to dial, what should you pay attention to? A: 1. Choose the built-in wireless module WCDMA or EVDO. The corresponding module settings are different. Different machine models support different modules, so please make sure that your module and SIM correspond. Never use a telecom SIM card with a WCDMA machine. 2. Whether the server IP and port settings are correct, whether the 3G/4G signal strength is sufficient for dialing, and whether the 3G/4G dialing is successful. 3. If the dialing is unsuccessful, please check whether the 3G/4G antenna is in good contact. If the signal is very weak, it may not be possible to dial the number; in addition, check whether the SIM card has enough traffic. If there is no traffic, the dialing will not be successful.   Q: Generally, when encountering the problem of 3G/4G no reporting and no video, what should you do first? A: Press the INFO key to enter the system information page, check whether the SIM card exists, the signal strength, the dialing status, and whether the antenna is in good contact. Then check whether the SIM card has no traffic, and replace a SIM card to judge. This is the most basic judgment. If there is a signal but the number cannot be dialed, then check whether the center number and port are set correctly. Then check whether the device number of the product has been occupied.   Q: 3G/4G signal is intermittent, and the video is stuck? A: At present, the signal coverage of WCDMA and EVDO is relatively wide (4G coverage is not comprehensive). In some mountainous areas, there is no signal coverage, and in some suburban areas, the signal is very weak due to the network constraints of various places. At this time, the video will be stuck or cannot be seen. This situation is greatly affected by the local network; secondly, check whether the frame rate of the sub-stream setting is too high. When the network status is not good and the frame rate is set high, the video may also have this situation.   Q: The WIFI signal is above -60db but it cannot be connected? A: If your WIFI is set correctly, generally there is no problem with the signal reaching above -60db. If the host cannot be found in the LAN, you need to check whether your SSID and password are set. Of course, the basic IP address must also be set; in addition, check whether the encryption type and authentication mode are set as required.   CMS related questions   Q: The device has been started, but the vehicle and video cannot be seen in the CMS client? A: First, confirm whether the center's registration server is turned on and online, and then check whether the host device number has been occupied to cause a conflict; secondly, check whether the server center IP and port are set correctly; whether the device reports to the center through the built-in 3G module or through WIFI. If you choose to see the built-in 3G, please check whether the type of 3G module is selected correctly, such as WCDMA and EVDO modules must be supported by the corresponding SIM card, check whether the antenna is in poor contact, and whether the data access point and center number are set correctly. If it still doesn't work, please collect as much information as possible and submit it to the technical support staff for analysis. The more data submitted, the easier it will be for the technicians to solve the problem.   Q: The device is online, but the video image cannot be seen? A: Please set a lower sub-stream to transmit the image. When the sub-stream bit rate is set very high, it will be blocked or the transmission speed will be slowed down due to the upload limit of the network; poor or intermittent network signals will seriously affect video transmission.   Q: The device reports normally on CMS, but can't watch the video after using it for a period of time? A: First check whether the information on the host side shows dialing. If it is always in dialing status, it is possible that the SIM card traffic has been used up. Replace the SIM card for testing. Secondly, check whether the device number of the host has been tampered with by the crash. The host with modified device number needs to re-report and add vehicle information. Thirdly, if changing the card does not work, you need to check whether the 3G module of the host is faulty. sd card video recorder，Mobile Digital Video Recording，vehicle SD card MDVR，Vehicle Monitoring System，what is mobile dvr，mobile dvr

Q: What should I do when the product has a problem that I can't handle? A: Record the product model and software version number, and submit a detailed description of the problem to our technical support engineers for analysis. The more detailed your description is, the easier it will be for us to analyze and handle. Q: What should I do when the vehicle-mounted host device has no video output? A: 1. Check the power-on status of the host. If only one blue indicator light is on, it means that the host is still in standby mode and has not been turned on; at the same time, check whether the red and yellow wires of the host power supply are powered normally. If only one wire is powered, the host cannot be started. 2. Check whether the display is powered and whether the display video is switched to AV state. 3. Check the connection status of the host video output cable and the display. 4. Check the lock status of the host lock to ensure that it can be turned on normally. Q: What should I do when the host video input interface and the camera input interface are different? A: The vehicle-mounted host uses a 4-pin interface, and the camera is a BNC interface or an aviation head type. If they are inconsistent, please use a conversion connector to connect, or use a line that is standardly connected to the vehicle-mounted host line sequence definition. Q: The device is turned on and the hard disk has been installed, but there is no recording. What should I do? A: 1. Check whether the hard disk has been formatted after installation. Unformatted hard disks cannot be used. Enter the main menu-management tools-format and format the newly installed hard disk. 2. Whether the recording channel is closed and whether the timed recording is set. No recording will be made during the time period when the recording is not in progress. 3. Check whether the hard disk is in good contact and whether the front panel HDD is lit. Q: The recording file is lost, or there is no recording file for a certain period of time? A: 1. By analyzing the time period determined in the first video file before the final video file is lost and restored. 2. Confirm whether the host is not turned on during that period, such as the host is not set to delay recording due to a crash, parking, loading and unloading, etc. Q: The vehicle-mounted pan-tilt cannot be controlled and cannot be rotated up, down, left, or right? A: Are the pan-tilt protocol and baud rate set correctly, are the addresses corresponding, and whether the channel video is selected as maximized when controlling the pan-tilt. For example, to control the second channel, the second channel image must be maximized to the screen to control it. GPS related issues Q: GPS module exists but no coordinate information? A: 1. Check whether the GPS module exists. If the GPS module does not exist, please check whether the hard disk is installed or in good contact. 2. Confirm whether the GPS antenna is in good contact and whether the antenna is disconnected. It is recommended to place it in a place with strong signal. Note that some car glass shielding films will form GPS signals. 3. If the test is in the room, the GPS antenna is in the room and the signal is shielded. It is recommended to place the GPS antenna outdoors. Q: Is there a deviation in the GPS geographical location displayed on the map? A: If the GPS module has been located, it means that the signal is valid. There are many reasons for the deviation, such as government restrictions, error allowance, GPS signal interruption, etc.; the actual satellite map will have deviations for safety reasons. Generally, GPS correction can solve the problem. Vehicle Camera Solution,Vehicle Monitoring System,mobile dvr

What is slag management? 1. Slag: Slag refers to the construction waste (including engineering earthwork stone, abandoned soil, residual mud, etc.), building materials (including sand, pebbles, soil, mortar, concrete, etc.) and bulk materials (including loose coal, coal slag, etc.) required and generated in urban construction sites and enterprise production such as houses, roads, bridges, flood control pipes, etc. in the urban planning area. Understand simply and flexibly-slag is not just "soil", but a big concept including some construction waste, building materials, and bulk materials. 2. Slag transportation management: The process of organizing, managing and supervising the disposal and transportation of slag within the administrative area by departments with administrative management functions such as environmental sanitation, engineering construction, transportation, and environmental protection in a relatively centralized administrative law enforcement manner. 3. Objects of slag transportation management: Simply put, it refers to the relevant responsible units and personnel in the entire process of slag generation, stacking, transportation, and dumping. What is illegal slag operation? The so-called illegal operation, of course, refers to the operation behavior that violates relevant laws and regulations. Some people may not understand, so let's give some examples: 1. Illegal disposal and transportation of slag without going through the disposal and transportation procedures. 2. Irregular vehicle loading operations, over-height, overloaded, not sealed, (incomplete documents for vehicles transporting slag). 3. During transportation, the wheels are muddy on the road, and vehicles spill and drop slag, polluting the urban environment. 4. Vehicles transporting slag do not drive according to designated routes and times. 5. Slag is not piled up or dumped at designated locations, and the piled up and dumped behaviors are not standardized. The consequences of illegal operations are not only pollution and affect the appearance of the city, but more seriously, it disrupts social order and even endangers public safety, and will be punished accordingly! What is civilized disposal of slag? 1. Anti-pollution of construction sites 2. Fence operation 3. Standardized loading 4. Clean vehicles on the road 5. Dumping at designated locations Written at the end But we can still often see such scenes: heavy-duty trucks are loaded with soil and gravel, most of which are directly exposed to the outside, and some are only symbolically covered with tarpaulins, with thick dust on the surface. The wheels roll up yellow soil and speed on the wide road. The soil on the wheels is thrown onto the road surface, and the soil on the truck is constantly scattered. It sweeps through like a sandstorm, and pedestrians and vehicles can't avoid it. These behaviors of not transporting in accordance with regulations have caused great pollution to the road environment by the large amount of construction waste and construction materials thrown out. In order to eliminate the pollution of urban areas by construction waste and soil from the source, and at the same time ensure the safety of pedestrians and public property in urban areas. We should strengthen supervision over the "two fields and one line" (i.e. construction sites, disposal sites, and transport vehicle routes), conduct scientific supervision on dump trucks that violate regulations and use the "third eye" to control them in real time and put a "tight ring" on them. ADAS camera,DSM camera,Car Security Cameras

For many flammable and explosive places, fire prevention, electrical protection, and spark prevention are basic operations, so there will be corresponding requirements when choosing monitoring equipment.   As ordinary cameras increase in age and the surrounding environment changes, they may cause leakage and sparks due to aging of the line or equipment failure, which may bring potential safety hazards to the surrounding environment. Therefore, in order to protect the safety of the monitoring site, explosion-proof surveillance cameras are now available.   (I) The difference between explosion-proof cameras and ordinary industrial cameras   There is no essential difference between explosion-proof cameras and ordinary industrial cameras in terms of photoelectric structure. However, in some special industries, such as petroleum, chemical, natural gas and other industrial enterprises, various flammable and explosive gases, liquids and various dusts and fibers may leak and spread during the experiment, production, processing, transportation and storage, which is very likely to cause explosions and fires, causing significant losses to the country and the people. Picture   As the "good guy" in the camera industry, explosion-proof cameras can coexist peacefully with more than 100 "hot-tempered" flammable gases. Its most important feature is that it uses one or more explosion-proof forms to process industrial cameras, so that they can monitor in flammable and explosive on-site environments.   (II) The difference between explosion-proof cameras and riot-proof cameras   Many times, riot-proof cameras and riot-proof cameras are easily confused, and people are accustomed to comparing the two together, but in fact, riot-proof cameras and explosion-proof cameras are two products of different natures. Next, we will distinguish between the two in terms of concepts, application fields and manufacturing processes. Picture   1. Different concepts Anti-riot cameras are also called high-security cameras, impact-resistant cameras, anti-strike cameras, and anti-destruction cameras. As the name implies, anti-riot cameras are cameras that can still ensure the normal operation of components under external violent attacks. The characteristic is that their shells have strong impact resistance. Explosion-proof cameras belong to explosion-proof monitoring products. They are the cross-products of the explosion-proof industry and the monitoring industry. They have explosion-proof electrical performance and certification, and can use conventional camera products in high-risk flammable and explosive sites.   2. Different application fields Explosion-proof cameras can be used in many enterprises or research departments such as petroleum, chemical, coal, scientific research, and military. In the process of experiment, production, processing, transportation and storage, various flammable and explosive gases, liquids, and various dusts and fibers may often leak and spread. After these substances are mixed with air, they will become a mixture that is prone to explosion hazards. The places near them have also become explosion-hazardous places to varying degrees, and the concentration of explosive mixtures may continue to increase. When the concentration of explosives reaches the critical point of explosion, once the ignition source sparks, arcs and high temperatures appear, serious accidents such as explosions and fires will occur, causing casualties and property losses. In order to realize the application of monitoring in flammable and explosive on-site environments, explosion-proof cameras came into being. The application of riot cameras is mainly concentrated in finance, public security, prisons, commerce, subways, mining and relatively harsh environments. It can not only be used to deal with man-made malicious acts of destruction, but also to deal with harsh natural and production environments, reducing their damage to the camera.   3. Different manufacturing processes Most riot cameras are hemispherical or spherical in design, so the manufacturing process of the camera's transparent protective cover and upper shell will become the key to the camera's riot-proof ability. In order to meet the anti-violence requirements, more and more products' transparent protective covers are made of polycarbonate (PC) engineering plastics, and some manufacturers' products use polymethyl methacrylate (PMMA) engineering plastics (acrylic, acrylic) ball covers. The base of many spherical riot cameras uses a cast aluminum shell, which can withstand general strength impacts.     (III) Three mainstream types of explosion-proof cameras   There are three main types of explosion-proof cameras on the market: intrinsically safe, positive pressure, and flameproof. As time goes by, the flameproof type has gradually become the international mainstream type.   1) "Intrinsically safe" cameras Starting from limiting the energy in the circuit, the camera reduces the potential spark energy to below the energy that can ignite the specified gas mixture through reliable control circuit parameters, and the heating temperature of the wire and component surface is limited to below the ignition temperature of the specified gas mixture. All circuits inside the camera are intrinsically safe circuits that cannot ignite the specified explosive gas environment under standard conditions (including normal operation and specified fault conditions). The cost of "intrinsically safe" cameras is relatively expensive.   2) "Positive pressure" explosion-proof cameras Maintain continuous air or fill in inert gas in the camera to limit the flammable mixture from entering the camera through the outer shell.   3) "Flameproof" explosion-proof camera The working principle is to enclose all the parts of the camera that may ignite the explosive gas mixture in a shell. The shell can withstand the internal explosion of the flammable mixture that penetrates into the shell through any joint surface or structural gap of the shell without damage, and will not cause the ignition of the explosive environment formed by one or more gases or vapors outside. The parts of the camera that may generate sparks, arcs and dangerous temperatures are placed in the flameproof shell, which isolates the internal space of the camera from the surrounding environment.Explosion Proof Camera,Vehicle Camera Surveillance System DVR,Car safety Camera System

3. Installation of BSD and sound and light alarm BSD camera and sound and light alarm can monitor blind spots and alarm pedestrians approaching. 1) Detect pedestrians or bicycles in blind spots a. Longitudinal distance of pedestrians or bicycles in the detection area within the screen b. Lateral distance of pedestrians or bicycles in the detection area within the screen c. Pedestrians or bicycles entering the detection screen from the rear d. Pedestrians or bicycles entering the detection screen from the side e. Pedestrians or bicycles entering the detection screen head-on 2) After detecting that the distance of pedestrians is too close, sound and light alarms are broadcast to remind drivers and pedestrians to pay attention to safety 3) BSD camera is a starlight camera with original color display at night. a. Side BSD cameras are generally used on medium and large vehicles with relatively large blind spots such as muck trucks, large trucks, and mixer trucks. When installing, the camera should be installed at the rearmost edge of the blind spot (side BSD is recommended to be installed at the right rear). In order to better detect pedestrians in the blind spot, the installation position should be about 1.8 meters above the ground, and the camera angle should be adjusted to slightly face outward and downward, so that the picture can cover most of the blind spot and the vehicle body does not exceed 25% of the picture. b. The forward BSD camera is also used on large vehicles. The installation position is generally selected on the cover above the windshield of the cab, and the installation position is as centered as possible. The camera extension line should be routed from the bottom of the vehicle and fixed through the frame itself. It should not interfere with the truck bucket or mixing tank to avoid affecting the wire during unloading or mixing. c. The sound and light alarm should be installed outside the co-pilot seat door, close to the window, so that the voice broadcast can be more clearly received by pedestrians, and at the same time, the driver can hear the alarm sound. (Schematic diagram of vehicle blind spot) (BSD installation location diagram) 4. Precautions for camera installation During the installation process, do not touch the camera lens with your hands or other objects; After installation, remember to tighten the limit screws; After installation, be sure to tear off the lens protective film; After installation, make sure that the ADAS camera front cover and the camera are tightly combined. If not, please hang them up; After debugging and calibration, check the camera again. TAG:Car Camera solution,DSM camera,voice alarm

  1. DSM camera installation   DSM camera can detect and warn about unsafe driving behaviors. By detecting changes in eyes and face, it can identify all unsafe driving behaviors of the driver while driving, and give corresponding voice prompts;   Unsafe driving behaviors include:   a. Fatigue: yawning, closing eyes   b. Making phone calls   c. Distracted driving: looking around, looking down   d. Smoking   e. Driver abnormality: the driver leaves the driving sight   The installation location of the DMS camera should be selected according to the following principles:   l Installation location: It is recommended to install it on the center console or dashboard;   l Installation angle: To ensure that the driver is in the driving direction, the camera is in the driving direction, and the camera is in the driving direction. The angle is recommended to be as small as possible within 30° to the right of the driver;   l Installation distance: The distance between the camera and the face ranges from 60cm to 120cm, and it is recommended to be installed at a position of about 80cm;   l Ensure that the face is located in the center of the DMS camera (which can be confirmed through the mobile phone APP);   l Ensure that the DMS camera does not block the driver's line of sight and does not interfere with the driver;   l Ensure that the DMS camera and the driver's face are not blocked by other debris such as the steering wheel;   l The DMS camera must be kept horizontal and cannot be tilted.   Under the premise of meeting the above conditions, the smaller the deviation angle between the DMS camera and the driver's face, the better, and it is best to face the driver directly.   2. ADAS camera installation ADAS cameras can warn of lane deviation and collision.   (1) Monitor whether the driver turns on the turn signal when changing lanes according to regulations;   (2) Provide a voice warning of lane deviation based on the amount of deviation during driving;   (3) Calculate the collision warning level based on the real-time speed, determine the distance between vehicles and the forward collision warning, and issue a warning.   1) For small vehicles (typically passenger cars, such as online ride-hailing vehicles), the front-view (ADAS) camera should be installed in the upper middle part of the windshield, near the position below the rear view mirror, and within 10 cm to the left and right of the vehicle's center axis.   Note: The lens must not be blocked by the wiper.   ( ADAS camera installation location for Small car)   2) For medium and large vehicles (typically commercial vehicles, such as buses, muck trucks, etc.), the front-view (ADAS) camera should be installed in the middle of the windshield, close to the bottom, within 10 cm to the left and right of the vehicle's center axis.   Note: The lens must not be blocked by the wiper   (ADAS camera installation location for medium and large vehicles)   After determining the position, tear off the 3M sticker, fix the camera on the front glass, and use the knob to adjust the camera position so that the ADAS screen has half of the sky and half of the sky. After adjusting the position, tighten the limit screws.

1. What is a vehicle-mounted remote monitoring system? The vehicle-mounted video monitoring system usually refers to an emerging system that has developed with the application of digital audio and video coding technology in vehicles. The system includes a vehicle monitoring system composed of vehicle-mounted terminals, network transmission and monitoring platforms, providing real-time transmission of video images inside and outside the vehicle, real-time positioning of vehicle positions, dispute evidence collection, irregular driving and other status monitoring functions to solve the current dynamic management problems of vehicles.   2. What are the functions of the vehicle-mounted remote monitoring system? The main functions of the vehicle-mounted remote monitoring system include remote image transmission, video recording, storage, downloading, playback, fuel volume, temperature, vehicle speed, driver status and other monitoring, voice intercom, alarm linkage, GPS positioning, vehicle history trajectory playback, equipment remote monitoring, etc.   3. In what areas can the vehicle-mounted remote monitoring system be applied? It is mainly used in various vehicles, including school buses, buses, taxis, cold chain logistics vehicles, sanitation vehicles, muck trucks, freight trucks, police cars and other vehicles.   4. What products are currently used in the vehicle remote monitoring system? ——On-board MDVR: commonly known as on-board hard disk recorder, supports HDD/SSD/SD card storage and multi-channel video transmission;   ——On-board camera: you can choose analog high-definition and network (IPC) cameras, mainly used to collect video data;   ——Various sensors: detect different states, such as compartment sealing detection, compartment lifting detection, vehicle real-time oil volume collection, RFID electronic tags, blind spot radar detection and early warning, etc.;   ——Monitoring platform: you can view vehicle trajectory, vehicle location, video recording, etc. on the platform, and manage the vehicle through voice intercom and remote command;   ——Network transmission: you can choose 3/4G network, WiFi, GPS according to your needs;   5. What functions can be realized by the vehicle remote monitoring system platform? The vehicle remote monitoring system platform can realize real-time video preview, voice intercom/monitoring, image capture, GPS positioning, video playback, trajectory playback, PTZ control, and vehicle operation management system (please contact us for specific information).   6. How does the vehicle remote monitoring system support alarm linkage and record at the same time? The alarm linkage can be divided into front-end alarm linkage, client alarm linkage, and platform alarm linkage. The alarm event triggers the front-end alarm device through sound, light, electricity, etc. The alarm output device directly outputs the alarm information at the front end and can also trigger the alarm recording at the front end; the platform supervisor can trigger the platform's alarm linkage after receiving the alarm information: inform the client by sending SMS and customer emails, linking the center recording, etc.; after the client receives the alarm signal, it can be immediately reflected on the client's interface to prompt the customer that an alarm event has occurred.   7. What are the ways to store video images in the vehicle remote monitoring system? The vehicle remote monitoring system provides three storage methods: front-end, center, and client. The general principles for determining the storage location are as follows:   Front-end storage: that is, storing video recordings in the hard disk or memory card that comes with the MDVR, supporting uploading, copying or downloading videos;   Central storage: that is, video recordings are stored in the hard disk display supported by the recording server of the central platform or the disk display supported by the network storage; if the front-end does not have a storage function, the central storage is generally used, and the central storage can be used as a backup for the front-end storage.   Client storage: The video recordings are stored in the disk of the monitoring machine browsed by the client, generally as temporary video image storage: such as snapshots and manual recordings.   8. What are the characteristics of the video surveillance industry's storage needs? Video surveillance has the following characteristics for storage needs: ① The demand for storage capacity is relatively elastic. The amount of storage capacity is related to factors such as the requirements for picture quality, the size of the picture, the frame rate of the picture, and the length of storage time. Changes in these factors will cause a large change in storage capacity. ② The storage performance requirements are not high, but it needs to be able to meet long-term continuous data reading and writing, with large data flow and a small number of simultaneous access requests. ③ The data storage period varies in length and can be reused after exceeding the usage time. In general monitoring places, data is stored for a certain period of time (such as 10 days) and can be deleted or overwritten later.

Solution for School Bus Vehicle Monitoring System What you may think about when talking about school bus? As parents, you may wonder” Whether my kids are safe? What are my kids doing?” Like school, you may care” if the students are in a safe environment? If the driver is driving properly without fatigue driving or drunk driving?” If unluckily an accident happens on a school bus, the police may ask”whether the school bus has record of over speeding and overloading, is there any evidence are kept?” Installing a 4G Mobile DVR could clear all those doubts and provide all parties a convenient way to access what’s happening in the school bus.      Sanan offers a wide range of mobile DVR to meet different customers’ needs. No matter the size of your fleet, or the type of your vehicles, you can always find a tailored solution from us. In this article, you will get a clear understanding of the school bus monitoring with our 4ch high resolution 4G Mobile.   Sanan security series are 4CH hard drive Mobile DVR with GPS, 4G and Wifi optional. It c support 4CH 720P AHD cameras +1CH 1080P IPC. The maximum memory of the hard drive can reach 2TB. With 4G and the compatible IVMS software, it offers a live video streaming of the inside and outside of school bus. 1. Main features of Sanan 4g mobile DVR: l 4/8-channel 1080P AHD high-definition car SD card video recorder; l Support 4 channels of AHD million high-definition video inputs, 4 channels of audio input, and each channel can record 1080P million high-definition videos; l Supports optional 1080P/720P/D1/HD1/CIF recording, adjustable frame rate and image quality, and supports up to 4 channels of local playback; l Locally supports 1 channel AV audio and video interface output and 1 channel VGA output; l Supports dual-channel SD card recording by default, and the SD card supports a maximum of 512GB; l Supports 5 IO alarm inputs and 1 alarm output by default; l Supports 1 RS232 output interface by default; l Supports GPS/Beidou positioning, and supports 1-channel wireless network 4G module by default; l Super network function, the host function parameters can be set remotely. l Remotely supports audio and video monitoring, remote PTZ control, manual alarm, and overspeed alarm. l This machine uses 8V-36V DC wide voltage power supply; l Support network monitoring platform, optional protocols 808/1078, TTX, etc.;   2. Main features of our IVMS software: Real-time video & audio monitoring GPS, car tracking GEO-Fence Voice intercom Driving route and status record PTZ control Fuel volume detection Video search and download Generating reports   3. What can be achieved from the whole system: Real-time video monitoring From IVMS, parents and monitoring centre can get live video of the inside and outside of school bus Voice monitoring Vehicle-mounted with DVR can do voice recording 4 Channels(up to five channels) GPS information From IVMS, the monitoring centre can easily access school bus status, route, fuel, speed, location, parking and driving, etc. 2-way voice speaking Through the intercom, the driver can talk with control centre at any time. Online help via the emergency button If there is an emergency, driver can press SOS button to ask for help. The alarm message will be sent to monitoring centre at once. Video data storage All video and voice data are stored locally on DVR either by SD card or HDD. When necessary, the user can download videos remotely through IVMS software and store at computer. Generating reports The system also provides users with accurate data analysis and detailed data report, which can be exported by the need of different parties.     4. How does the whole system work?   5. Detailed cameras layout    

What is 3G, 4G & 5G Mobile DVR? The 3G & 4G mobile DVRs use a 3G/4G connection and are interoperable with multiple devices thanks to a variety of connecting ports and possibilities. The convenience of setting up and operating the 3G/4G mobile DVR makes them simple to set up and begin monitoring your vehicle without requiring a significant amount of your time. These 3G/4G mobile DVR are generating superior image qualities that provide more and sharper details for precise analysis, thanks to always improving technologies. Their other capabilities, like mobile applications or cloud services, enable you to see the footage in real-time from any place. Nowadays, the majority of mobile digital video recorders use 4G connectivity. The 5G connection, on the other hand, is the fastest of the three and will be available to the public soon. What is the meaning of channels in Mobile DVRs? If you're looking for the best Mobile Digital Video Recorder for your vehicle, you've probably come across the term CHANNEL. The term channel may be unfamiliar to someone new to the automotive security market. In this section, we will discuss the word channel and which is appropriate for your car. The number of cameras or devices that can be connected to the mobile DVR is referred to as a channel. A 2 Ch mobile DVR, for example, may accommodate up to two external cameras. Because there are adaptors on the market that can accept 1 to 2 cameras per port, a 2 Ch Mobile DVR can also support 4 cameras. A 4 Ch Mobile DVR may accommodate from two to four cameras as well as other devices at the same time. What`s the function of AI in Mobile Digital Video Recorder? AI is a technology in mobile digital video recorder that is utilized for encoding and decoding data after it has been collected. The major goal is to gather peripheral data and effectively present it to users once it has been analyzed. A sensor and associated detectors, for example, are put on the car to gather data and transfer it to the AI-based mobile digital recorder terminal, in which the software does in-depth interpretation and provides input to the user via visual or sound. In this approach, the driver might be actively alerted of potential hazards, lowering the likelihood of an accident. Furthermore, the AI Mobile DVR may communicate information to the cloud through 3G, 4G, or 5G to give a complete telematics system feature. The features include ADAS, DMS, BSD, and CMS Platform functionality which are great tools to assist the drivers to travel safely.

What are the benefits of using a mobile DVR? · You can install a Mobile Digital Video Recorder on any vehicle to record the vehicle`s surroundings. · With the mobile digital recorder installed, users may playback the past video footage from their vehicle`s trips. · A mobile Digital Video Recorder is a great tool to capture future occurrences like road crashes, collisions,s or other traffic accidents which may be caused by other road users and accusing you to be responsible. The DVR mobile will have the evidence that you may need for false accusations. · Mobile DVRs are becoming important since they may provide facts to law enforcement captures like excessive speeding and bad driving conduct. · Mobile DVR saves time and increases work efficiency for detectives because they will not have to check so much footage and the modest way which makes traffic investigations more smoothly. · This adaptable mobile digital video recording device allows you to capture sharp videos from several cameras. · A mobile DVR is intended to assist fleet managers to monitor their fleet in real-time. The result will also help them to evaluate each of their drivers. · A DVR Mobile also has anti-vibration characteristics, which allows it to be used for an extended amount of time without losing pieces due to rough travel that causes the car to vibrate. What is vibration testing on Mobile Digital Video Recorders? To verify the right functioning of the DVR Mobile and that it fulfills its role now and, in the future, shock and vibration testing in compliance with the product's intended environment and use is required. Some legislation and MDVR standards require testing, thus it is included in the total environmental evaluation conformance. Transport test patterns provide assurance that the mobile DVR will reach at its target location, i.e., the end consumer, undamaged, which can lead to fewer product complaints. Every device is susceptible to vibration loading and impact stress. This is why the vibration test is crucial when manufacturing Mobile digital recorders. Anti-vibration inspection ensures Mobile DVR durability and its content safety in a diversity of conditions. All over the Anti-vibration Tests, the technologists subjected the mobile digital recorder to three different categories of movement settings. · Horizontal · Vertical · Combination The findings expose that the upgraded Mobile DVR accomplishes its function effectively in these situations and it has no effect on general effectiveness. What is the meaning of the Mobile DVR CE standard? All device components, comprising time, functionality, content, clients, interface, and activity records, are rated by the CE standard for Mobile DVRs. This score can then be utilized to compare one Mobile Digital Recorder to another. With so many features accessible in the industry, consumers must be aware of this score in order to make the best decision for their requirements. The DVR Mobile meets the CE standard for meeting the primary characteristics of a device that can be used securely in the industry, as defined by Directive 2004/108/EC. The CE Registered trademark on a device shows that the device's producer or manufacturer has confirmed conformance with essential European Union regulations and that the device may be marketed everywhere in the European Economic Area or EEA. It is a felony act to apply a CE Certification mark to a non-compliant device and sell it.

Dear Customers, As the Chinese New Year approaches, we wanted to take a moment to extend our warmest wishes to you and your loved ones. It's a time of joy, family, and new beginnings, and we hope that this special holiday brings you an abundance of happiness, prosperity, and good fortune. In observance of the Chinese New Year, please be advised that our office/factory will be closed from 2024.2.5 to 2024.2.17. We apologise for any inconvenience this may cause and assure you that we will attend to your inquiries as soon as we resume regular business hours.

What to look for when buying a Mobile DVR? Because it regulates whatever your vehicle security system does, selecting the appropriate Mobile Digital Video Recorders is just as crucial as selecting sensors when searching for a Mobile DVR. Nevertheless, because of the variety of options available in the industry, this can frequently appear overwhelming. This is exacerbated further by various firms defining major characteristics in distinctive ways. Breaking it further, these are the factors to evaluate when considering models: Channels – The number of cameras that the Mobile DVR may film at the same moment. Most Mobile DVRs typically include four, eight, or sixteen video feeds. Please remember that audio connections are distinct, and some entry-level mobile digital recorders would only accept audio from either of the sensors. Frame Rate – A 25FPS Mobile DVR is required for seamless videos with no jumpiness. Sadly, this is where things become complicated. For the finest performance, use a Mobile DVR that can record 25FPS per camera or channel at high resolution. This is due to the fact that some lower-priced devices promise a rapid FPS, and it will actually be at 50% the total resolution, not in full HD. When purchasing a Mobile Digital Video Recorders, ensure that the FPS is steady at the finest parameters. The descriptor "Real-Time HD" should also confirm this. The FPS of a mobile digital recorder is frequently reported as a total figure for all feeds, therefore an 8-channel mobile digital recorder will be represented as 200FPS. Resolution – The majority of Mobile digital recorders in the industry feature a high-resolution option, which records 720x576 pixels. Furthermore, some modern mobile digital video recorders that operate with Internet-Protocol Cameras will record in HD which is called 1080P Mobile DVR. Online Connectivity – Most Mobile Digital Video Recorders now include an internet connection, enabling users to watch recordings from sensors through the web or on any smartphone. Yet, there is a wide range of interoperability for these functionalities. Some, for instance, allow users to manage the DVR Mobile remotely, while others merely enable users to view a live stream. Also, depending on how you wish to view it on any device, the accessible functionality may vary. Definitely confirm ahead of time how well the mobile digital recorder will interact with your unique device. Hard Drive Size – Because all Mobile Digital Video Recorders record video to a constructed HDD, make absolutely certain the one you purchase is large sufficient for your purposes. Some Mobile DVRs also have an SD card slot for additional recording space. Extra Functions – Many mobile digital recorders will include extra functions that may be useful in your vehicle installation. Features include HDMI outlet for Full HD monitoring, warning inputs and outputs, GPS, AI-Based system, and room to accommodate numerous Storage Devices. These aren't normally headline features, but they're worth keeping an eye out for when evaluating brands.

When looking for monitoring security devices or Mobile DVRs, you'll very certainly come across H.264 mobile DVR and H.265 specifications. What exactly do those phrases mean? Many individuals may identify H.264 with a surveillance camera system. Many Mobile DVRs or DVR Mobile in the industry have H264 or H265 written on the box or displayed during the first installation of the device. However, many of the better-quality videos that are broadcast online use H.265 compression. H.265 is the latest video compression technology that outperforms H.264. In comparison to H.264, H.264 provides superior bit compression of 57 percent at 1080p and 64 percent at UHD or 4K. Because all of our gadgets, from smartphones to smart TVs, are capturing or showing at considerably greater resolutions, HEVC compression is rather critical. H.265 provides approximately twice the compression algorithms ratio at the very same degree of image quality or significantly better video resolution at the same frame rate. It enables resolutions of up to 8192 by 4320, including 8K Ultra HD resolutions. The present H.264 (MPEG-4/AVC) specification no longer satisfies the demand of video encoding for increased image resolution due to the rapid development of IP video surveillance technologies. The next wave 4K Ultra HD and 8K Ultra HD video equipment will undoubtedly become the industry mainstream.

What`s the difference between a Mobile DVR and a DVR? Application of Mobile DVR and DVR: Mobile DVR can be installed in different vehicles, such as logistic bus, truck, school bus, car, taxi, oil tank, etc...all different fleet transportation; DVR normally is installed at the office. Price of Mobile DVR and DVR: Mobile DVR price is higher than DVR because the main chip is more high-technology and multi-function. multiple IO Input Interface: Mobile DVR has many IO interfaces to connect more external devices, such as alarm buttons, People counting cameras, and RFID readers; DVR only can connect the CCTV camera to work. Network / Data Transmission of Mobile DVR and DVR: Mobile DVR can be built-in 4G, H.264, GPS, and Wifi, so that you can make it online via 4G SIM card, RJ45, and Wifi when Mobile DVR is installed at the truck; DVR can be online via RJ45 cable at the office. Construction of Mobile DVR and DVR: Mobile DVR has good anti-vibration, so you can select HDD/ SDD install the Mobile DVR to save the recording. All recording has to protect via special software. DVR doesn`t have vibration, it only can install at the office used and normally can use PC HDD to save the recording. Recording can open via the normal player. Advantage of DVR and Mobile DVR: DVR price is cheaper and easier installation at the office; Mobile DVR needs an anti-vibration design, so long life warranty. Shockproof design. Most important, Mobile DVR can do motion detection after power off, so that it can protect your vehicle better. How to select the perfect Mobile DVR for each vehicle? There must be a different application or Mobile DVR installation for each car. Each vehicle has its own set of needs. Here, we will provide our suggestions for each vehicle application so that car owners will know what to buy and what not to buy. Here are some examples for your reference: 1. Taxi and Personal Car: Since taxi cabs and sedans (personal cars) are often small in size, a 2ch mobile DVR or 4ch Mobile DVR will do. For instance, if you only want to capture both the front and back of the car, a 2 Ch mobile DVR camera plus 1 rear camera would be good enough. If somehow you want to cover the blind spots, a 4ch mobile DVR with 2 side cameras and 1 rear camera is perfect for you. 2. Buses and Public Transportation: For a transport vehicle with more than 20 seats, you can get a 4 or 8 channel HDD mobile DVR. These vehicles can also use 4ch SSD Mobile DVR. If you like bigger storage, pick an HDD mobile DVR that has 2TB to 4TB (optional) storage. If the vehicle is only used once in a while, a 2ch or 4ch SD card Mobile DVR is enough. After you've decided on the ideal Mobile DVR for you, you'll need to decide how many cameras you want to install. Interior cameras are essential for public transportation since they catch the activity inside the vehicle and provide evidence if there is an assault or misconduct inside the vehicle. 3. Oil tank and Cargo Trucks: Because these trucks are so enormous, they have a lot of blind spots. To avoid mishaps, it is vital to catch as many sides as feasible. Putting a 4ch or 8ch HDD Mobile DVR is advised, as is installing 4 to 8 cameras for complete coverage surrounding the vehicle. Consider placing an anti-explosive camera on the oil truck and other highly combustible vehicles. It will be an excellent investment because it is fire and explosion-resistant. 4. School Bus: Assuming a school bus is big enough to carry 20 passengers and up, an 8ch HDD Mobile DVR system is advisable. The system can include an 8 Channel HDD Mobile DVR, a people counting sensor, an RFID machine, several vehicle cameras, an LCD monitor, etc. depending on the vehicle requirement. Since this vehicle carries children, we must consider their safety by adding several cameras and security devices like a people counter camera and RFID which will notify the school or parents that their children arrived safely in school.

What's Mobile DVR A Mobile DVR system includes the recording device and other components to create a network to view recordings from different points. Mobile DVR is a type of device used to record and store video data in digital and analog form. Mobile DVR is a series of video recorders that have various cameras and storage devices. They are often installed in vehicles but can also be placed in other devices such as airplanes. With a Mobile DVR system, it can save you, your family, and your workers` lives. Also can save cost and improve efficiency. This guide helps you to know more about Mobile DVR, It covers all the information about Mobile DVR. We share everything that we care about and know. The Guide of the Mobile DVR is very rich, you can choose the information that is useful to you. Mobile DVR? Mobile DVR's short name is MDVR, Mobile DVR's full name is Mobile Digital Recorder. Mobile DVR is designed for all different vehicles, that is fleet management · Logistics: Cargo Van, Trucks, Dump truck, Oil Tanker, Cargo truck, · Public Transport: Coach, Tour bus, Public Transit Bus, Taxi, private car, train, subway, metro · Bus, School Bus, · Law enforcement: Police car, ambulance, and others, etc.

Fuel truck monitoring system provides comprehensive control of each tank compartment, volumes and places of fuel dispensing, tractor unit operation parameters, transportation route, as well as driver behavior on the road. The main task of tanker truck monitoring is online control of tank contents. Since a liquid cargo transported is of the greatest value, owners want to be sure that the volume of fuel poured into the tank will be delivered to consumers, and not [lost" along the way. Tank truck telematics monitoring system allows controlling more than 250 different parameters. Tasks Control of each tanker compartment Monitoring of volume, level and temperature of fuel in each compartment of a tanker. Detection of events and sending notifications about refueling (filling the tank) and draining. Monitoring of tanker manhole covers opening. Monitoring of volumes and places of fuel dispensing Accounting for the volume of fuel issued by the tanker, both total and for each refueling, with reference to date, time and location. Identification of unwanted interference and cheating attempts. Tractor unit fuel control Control of fuel tanks of a tractor unit and fuel consumption in [idle", [optimal", [overload" modes. Identification of events of refueling and draining from tractor tanks, intervention in the fuel system (draining from [return" line). Monitoring of engine operating modes Accounting for tractor unit engine operating time in [idle", [optimal", [overload" modes and remote fuel system diagnostics for preventive maintenance implementation and analysis of operation and downtime of a fuel truck. Transportation route monitoring Satellite monitoring of a route, location, speed, stops in real time allows you to discipline drivers and be sure of cargo and tanker itself safety. Application of fuel truck remote monitoring system Remote monitoring systems are applicable to tanker trucks that are used to refuel heavy mobile and stationary equipment in the field. System users: Tanker truck fleet owners and operators. Fuel monitoring from filling at an oil terminal to issuing to the end user or storage tank. Simultaneous use of level sensors, flow meters and GPS tracking helps prevent fraud and unauthorized drains. Fuel truck servicing companies. Remote diagnostics of engine, fuel and other systems according to flowmeters and CAN-bus, monitoring of operating hours, maintenance planning, advance ordering of consumables and spare parts. Fuel truck manufacturers. Remote monitoring of the technical condition and compliance with rules of equipment operation, monitoring engine lifetime, fuel system, tank and other components, collecting statistics of failures, modernization planning of manufactured tanker trucks. Tanker truck monitoring equipment Fuel truck operating parameters are measured instrumentally using intelligent onboard equipment. Fuel trucks monitoring system includes the following measurement equipment: 1,fuel level sensors; 2,fuel flow meters; 3,CAN-bus contactless readers; 4,telematics gateway. All measuring devices and readers are combined into a single wired and/or wireless network. The telematics gateway collects data from standard and additional sensors, and also works as a GPS tracker, generates reports based on received parameters and transmits information via the Internet or via Wi-Fi to an online server. Also, operation parameters of a fuel truck can be controlled locally on a CAN display screen. Sending e-mail and SMS notifications about important events (refueling, draining, intervention and many others) can be configured. Truck tanker monitoring system provides precise fuel level and volume measurement in each compartment of cistern, also measurement of truck operating parameters, geolocation and route tracking using GPS/GLONASS , as well as driver`s behavior – accelerations, harsh breaking and turning, speeding, high RPMs. Since the greatest value of tanker is the liquid cargo transported in cistern – the main goal of truck tanker monitoring system is to register and display status of liquid (diesel, biodiesel, kerosene, gasoline or other fuel): volume and temperature of liquid in cistern, if there were any manipulations with compartments of cistern (fuel theft, mixing with low-quality liquid) and places of liquid fill-up and delivery. Sanan telematics solution provides monitoring of more than 200 operating parameters of fuel transportation and performance of truck. Please get in touch and our expert team will contact you.

Vehicle Surveillance Systems are CCTV Security Cameras that allows you to maintain surveillance over your vehicles and assets inside the vehicles. Mobile cameras are crucial to help your transport business secured and safe. For evidence, crime prevention and even employee productivity. Installing vehicle surveillance cameras for vehicle security requires a recorder to be integrated inside the vehicle. However the versatility in function is powerful. Vehicle surveillance solution is a solution for monitoring vehicles. It usually includes cameras, sensors and other devices installed on vehicles to monitor the vehicle's location, driving speed, driving behavior and other related data in real time. This solution can help vehicle owners or fleet managers understand the status of their vehicles in real time, improving vehicle safety and efficiency. It can also be used to prevent vehicle theft, monitor driver behavior, provide evidence for accident investigations, and more Our logistics processes, services solutions, tools and systems in combination with strategic vehicle Security camera locations help you to meet your security needs and achieve security with much more accuracy. Moreover, our project engineers are experienced in applying security solutions to large scale buildings and properties. Whether it is the one time installation you need done, or whether you are looking for professional and long-term asset management or tech support requirements, we can assure you of the best services at the most economical pricing. Our sales and logistics consultants are always available to help you with any further and detailed queries you might have regarding our services and security solutions.

GPS system for satellite tracking and monitoring system for vehicles consists of a GPS navigation unit that is embedded in a vehicle, work machine or a ship, a central server and a software module that serves for access to users` information that is collected. The user can access all the data collected through GPS navigation units in vehicles through the software interface. Data can be viewed on a map and in text form, ie in HTML, CSV, Pdf, Xls, or other formats. All collected data is kept on the server, and the system user can easily restore back time and view everything that happened from the moment the GPS satellite tracking and surveillance system was installed. Vehicle Monitoring System is a system used to monitor and track vehicle driving conditions. By using GPS (Global Positioning System) and other sensor technologies, it can monitor the vehicle's location, speed, driving route, fuel consumption, mileage and other information in real time. Why invest money into installation of a vehicle surveillance system solution? Who is using this type of tracking? Which businesses can benefit from using GPS technology? Today`s business is full of challenges, and if they want to be successful, companies must learn to control their costs better than ever before. Some costs are very difficult to control or even perceive if they cannot be measured – this is precisely the task of the GPS satellite vehicle, boat and work machine surveillance system and monitoring system solution. Since the prices of products and services in the free market are constantly decreasing due to competition, being successful in the business depends precisely on the quality control of expenditures, and consequently on the increase of competitiveness on the market as well because the company that controls the expenditures can gain an advantage over its competition. If you are engaged in activities such as: distribution and logistics, sales, services, transport of goods and people, lease and sale of all types of vehicles (car rental, leasing), public service, healthcare centers, local and regional authority bodies, utility companies, and you own a large number of vehicles, these are some of the features of the system that contribute to reducing the cost of doing business: fast and optimal arrival of the driver to the destination, and consequently lower fuel consumption and savings in working hours, optimal use of vehicles by employees, and consequently lower fuel consumption costs, lower maintenance costs (service, tires, etc.) and increased driver safety, automatic reminders for regular and preventive vehicle maintenance (the system automatically warns you about tire changes, service, equipment maintenance, etc.), many insurance companies offer a discount of up to 20% for vehicles protected with GPS satellite surveillance and monitoring systems, document long lunch breaks, document unauthorized breaks, document overtime justification, document personal use of the vehicle on weekends or outside of working hours. by using the vehicle GPS satellite surveillance and monitoring system you can improve the quality of your service towards clients so that you can send you the nearest available vehicle, or calculate exactly when the arrival time will be based on the actual location of the vehicle, vehicle GPS satellite surveillance and monitoring system can help you monitor whether your employee has visited your customers, how long he stayed with each customer and which customers he visited, with the GPS satellite surveillance and monitoring system you can easily identify which employee is doing his job better, and you can also easily determine when is the time for a new hire, when you need to add a new vehicle in the system, or when the number of vehicles needs to be reduced, reduction of the phone costs, particularly abroad, as the GPS satellite surveillance and monitoring system allows unlimited communication with employees in the field, it simplifies the management of your movable property and greatly simplifies the dispatcher`s job, automatize the creation of travel orders and calculation of daily allowance (in just two clicks), eliminate the possibility of fuel theft. If you own more than one car in your company, it is time that you consider applying this technology to improve your work, efficiency and profitability.